Intel Pro 3945abg Driver Windows 10

One thing it demonstrates is that the Intel legacy wifi driver (Intel (R) PRO/Wireless 3945ABG Network Connection) works in Win 10 although no longer supported by Intel or Microsoft. In my case it involved disabling PCMCIA drivers (I do not use the PCMCIA card reader but there could be other options not tested). Download Intel(R) PRO/Wireless 3945ABG Network Connection for Windows to net driver.

  1. Intel Pro Wireless 3945abg Upgrade
  2. Intel(r) Pro/wireless 3945abg Driver Windows 10
  3. Intel Pro/wireless 3945abg Network Connection Driver Download Windows 10
  4. 3945abg Windows 10 Driver

Similar Messages:


Drivers :: Intel Wireless - AP Mode Gone After Upgrade

Oct 3, 2015

I have a laptop with an intel AC 7265 wireless adapter built in. With the normal Windows 10 driver, AP mode works - which I need to run Connectify.
I upgraded to the latest Intel driver as I was having other issues (Wireless would just disconnect and give me a 1609 address) but the new driver apparently doesn't support AP mode (hosted network support = no).
How I can get AP mode supported again?

Intel Dual Band Wireless-AC 7260 Losing Internet Connection?

Mar 20, 2016

I have a Intel AC 7260 WAN card in my laptop which is running Windows 10 x64. After about 10-15 minutes I will lose internet connection while still being connected to the SSID.
I installed the latest Intel AC 7260 drivers from here. Also I ran a complete scan with Malwarebytes which didn't find any threats. This issue started a few days ago.
Anyway of seeing if a application is causing this connection lose issue? It is only happening with this one device.

Networking :: PCIe Wireless Adapter Is Not Being Recognized?

Intel Pro Wireless 3945abg Upgrade

Dec 16, 2015

I just bought an ASUS PCE-N53 PCI-E adapter for my PC that I built several months ago. Previously, I was just using ethernet. Put the card in my PCI-E 1 slot, and installed the drivers from the installation disc, but nothing shows up in Device Manager and I have no wireless option in my Network Connections settings. why it's not showing up, minus it being dead out of the box? I can't try it in my PCI-E 2 slot because my graphics card is in the way.

Drivers/Hardware :: Intel HD Drivers Trying To Update But Device Is Disabled

Nov 12, 2015

I very briefly switched on the IGP whilst swapping from Nvidia to AMD last month and now Windows Update is constantly trying to update (and failing) the drivers even though no Intel drivers are currently installed, I used DDU to remove the Intel and Nvidia drivers.
How to stop it? Now whenever I open Windows update I get updates are available for Graphics Adaptor WDDM1.1, 1.2 and 1.3 for Intel HD Graphics 4600
I can't even search for new updates any more!

Drivers :: Intel HD Drivers Trying To Update But Device Is Disabled

Nov 12, 2015

I very briefly switched on the IGP whilst swapping from Nvidia to AMD last month and now Windows Update is constantly trying to update (and failing) the drivers even though no Intel drivers are currently installed, I used DDU to remove the Intel and Nvidia drivers.
How to stop it? Now whenever I open Windows update I get updates are available for Graphics Adaptor WDDM1.1, 1.2 and 1.3 for Intel HD Graphics 4600

Drivers/Hardware :: Cannot Install Intel RST Program

May 6, 2015

I am trying to install intel RST (rapid storage Technology) to try to restore my once blazing fast laptop.
Not that it works anyway but the setup keeps asking for .net framework 4.5
But windows comes with .net framework 4.6 & 4.5 and below.
So I tried disabling the windows one and re downloading it and that didnt work, it says already installed. How do I get around this?

Drivers/Hardware :: Switch From PC Manufacturer To Intel Driver

Jan 13, 2016

I have an Acer Aspire E5-571 and am trying to switch from the graphics driver provided by Acer to the newer version for my graphics card available directly from Intel. The card model is HD Graphics 4400 and the CPU is a 4th gen Core i5 so I'm pretty sure this is the correct driver.
I have tried uninstalling the graphics driver through the Windows Device Manager, then rebooting and installing the driver from Intel, but I continually get the message about my computer having a customized driver from the computer manufacturer. It seems that as soon as I uninstall the driver, it is immediately reinstalled by Windows, thereby not giving me the chance to switch to the Intel driver.Is there a way to manually switch to Intel's driver?

Drivers :: Intel WiFi Driver Cannot Start (code 10)

Oct 5, 2015

I have an ASUS e56u laptop that I updated from Windows 7 to 10. Since the update the -Intel(R) Centrino(R) Wifi N-6150- driver is not starting up. It is the newest version (ver15.12.0.9).

BSOD :: Unable To Update Intel HD Graphics Drivers

Aug 15, 2015

Upgraded Win 7 Pro Dell laptop to Win 10 Pro. Screen resolution changed on first win 10 boot and other resolutions greyed out. Windows update says unable to update Intel HD graphics drivers. Downloaded win 10 drivers from Intel site and installed. On reboot get continual bsod as above. No restore point since upgrade. Can't boot to Windows. how to get past the bsod

Drivers/Hardware :: Slow SSD Speeds With Intel 520 Series 240GB?

Feb 23, 2016

I'm using Win10 x64 and Intel 520 240GB SSD:
For my mobo, Asus P8Z77-V-Deluxe, I downloaded the official asus chipset drivers.
There is one for Win8.1 x64 and a Beta version for Win10.
The chipset driver for Win8.1 has installed the following:
1. under Device Manager> IDE ATA/ATAPI controller > Inter 7 series/C216 chipset Family SATA AHCI Controller
2. Version 12.8.0.1016 - Date 2013/08/01
If I install the Asus Win10 chipset driver, then instead of the Inel SATA controller, I'll end up having Standard SATA controller by Microsoft.
I'm currently using the Asus beta Win10 chipset driver, however I manually installed the Intel SATA controller which is officially supported on Win8.1 and is digitally signed.
I ran two SSD benchmark test with AS SSD (latest version).
With just the official Win8.1 chipset driver as mentioned above, I'm getting the following results:
With the Win10 beta chipset driver and the Standard SATA controller by Microsoft:
And here are the test results made by Intel SSD 520 Series Solid State Drive | Intel,SSD,520 Series,Solid State Drive,SSDSC2CW240A3,Benchmarks,Performance,Reviews,Olin Coles,Intel SSD 520 Series Solid State Drive SSDSC2CW240A3 Benchmark Performance Review by Olin Coles
Can spot the difference?

Drivers/Hardware :: Intel RST RAID Driver Causing Disk Errors

Jul 30, 2015

I have a PC with Asus P9X79 Deluxe motherboard. It has Intel chipset and Intel BIOS RAID (RSTe) and 6 SATA ports connected to it. The chipset IDE controller lists in Linux as:
Intel Corporation C600/X79 series chipset SATA RAID Controller (rev 06),
and the PCI ID is:
0104: 8086:2826 (rev 06).
My RAID configuration is 2xOCZ-VERTEX4 256GB SSD's in RAID0, as boot drive (C: drive), and 2 (quite old) WDC WD2500KS 250GB disks in RAID0 for extra storage (games, movies etc) (J: drive).
So yesterday I decided to upgrade my Windows 7 Ultimate to Windows 10 Pro. All seemingly went well during the upgrade process, and the system booted fine, and most stuff seemed to work as it should. But after a while when I accessed files on the J: drive I started experiencing random (temporary) freezes.
Then after a while it got more serious and the whole system froze, I had to hit the reset button.
So I rebooted and looked in the event log, I get see tons of errors there saying that the disk has a bad sector.
Then I try using the J-drive again, by viewing some videos there, and it works fine, but after a while there are some freezes and then I see in the event log, that the drive was reset. After this it works again for a while but then another of those resets comes, and freezes everything for a short while (like 30 seconds).
But when I try to copy some large files off the J-drive, another reset comes, and then the event log starts showing a lot of the error messages from before, with 'the disk has an bad sector'. (I will post screenshots of these errors after I reboot back into Windows).
After this I can't access the J-drive at all, and Windows gives me error messages when I try to.
So, I figure that I might have just got unlucky and the old WDC drive actually developed read errors, although it's strange that it happens exactly when I install Windows 10 (these drives are something like 7 years old).
Well I can't copy the contents off the disk from Windows since it keeps failing as described above, so I boot into Ubuntu Linux from a USB stick, so I can use ntfsclone to image the J-drive to another disk. I start it running expecting that I'll start seeing read errors, but to my surprise there are NONE. It also copies all files off the J-drive without any problems from inside Linux!
So it was after all not the old drive that had failed, but instead Windows 10/Intel had failed me in a big way.
I trawled the web for updated Intel chipset drivers and installed those from the Asus site, but it made no difference at all. I couldn't find any other Intel drivers and when I searched for the RST drivers on Intel's own site, I could only find ones for Windows XP upto Windows 8.1, but none for Windows 10.
For now I'm left with a PC that I can't use, because I can't go back to Windows 7 and Windows 10 is not working with my RAID arrays. I got some spare 2TB disks, and I'm right now copying all the data from the old J-drive (the RAID1 about 500GB) over to this, hopefully I can then work in Win 10, but I am VERY concerned because the same RAID and drivers are used for my master boot drive with the two OCZ SSD's.

Display Driver Intel HD Graphics Drivers For Windows 8 Stopped Responding

Jan 1, 2016

I get this error on a Surface Pro 3 which I have updated to Windows 10. It normally occurs when playing Minecraft, anywhere from 5 minutes to 1 hour after opening. I have attempted to update the drivers, but it says that the drivers are up to date (which is odd as I am using Windows 8 drivers on a Windows 10 machine).

Drivers/Hardware :: CD / DVD ROM Not Recognized

Jan 6, 2016

Yesterday I inserted a CD to install driver for my new headset. The CD-R open, close normally and I also heard the CD spinning. But not thing happened in my laptop at all. I checked This PC: no CD drive (before upgraded to win 10, I had installed win 8.1 and the CD dive was drive F). In Device Manager, there's no CD/DVD ROM section, even i had checked Show hidden device in View tab.I tryed every methods found online, but not fixed. Here's the details:
1. Try ALL METHODS in this link: [FIX] Optical Drives (CD/DVD) Icon Not Showing in My Computer Window - AskVG
-> nothing
2. Try to uninstall Channel 0 and 1 under IDE ATA/ATAPI Controller. But as you can see in the picture above: there are no Channels under IDE...Controller. Tryed to uninstall Intel(R) 8 Series...Controller and rebooted, nothing happen
3. Try to update drivers using IOBit Drivers Booster PRO but all drivers are up-to-date.

Drivers/Hardware :: CD / DVD Drive Not Recognized

Jan 27, 2015

I installed Windows 10 as an upgrade to Windows 8. My Dell laptop does not see the DVD drive. I had no success getting the drive to work in Windows 8 and (maybe of course) it doesnt see it now. This seems to be a common problem I have tried numerous fixes but have not had success. What is the latest and greatest solution?

Drivers/Hardware :: DVD / CD Drive Is Not Recognized At All

Aug 14, 2015

It really isn't my day. I recently upgraded to Windows 10 from Windows 7 and previously my DVD/CD Drive was working perfectly. Now, nowhere on my PC, and I mean nowhere, is my DVD/CD drive recognised as existing. There is no DVD drive showing in Device Manager or in Settings>Devices.
I have taken the side panel off my PC and all cables are properly plugged in.
I have not tampered with the BIOS at all.

Drivers/Hardware :: Headphones Are Being Recognized As Speakers

Oct 8, 2015

I started up my laptop a while ago to play some music while I do work but when I plugged in my headphones there was no music. The music plays on the speakers but headphones nothing.... I have tried many headphones on my laptop and none worked but they do work on my iPod. I am using Asus Zen Book pro UX501, windows 10 64 bit....

Drivers/Hardware :: USB Device Not Recognized Notification

Nov 9, 2015

I plugged in my USB drive and I get notification USB device not recognized. In This PC it shows but it looks like this:When I right click to try and format it, nothing happens. I also tried renaming the drive letter, nothing. I tried many USB fix tools, such as, USB drive defender, Flobo, mUSB Fixer, USB Refresh, USBFix 2016, and most of them didn't even see the device in the list. It's SanDisk Cruzer 16GB.

Drivers/Hardware :: CDs Not Recognized In DVD / CD Samsung Drive

Feb 3, 2016

I have recently upgraded to Windows 10 and alll is working well except for the CD/DVD drive does not automatically recognise a CD when its inserted. With previous Windows 7 when I put a music CD in drive wiith itunes open then itunes would ask if i wanted to import CD.
The CD/DVD is recognised in Device Manager and says that it is working properly. the only way I can get the CD to be recognised after inserting the CD is by going to the Device Manager and double clicking the CD/DVD line to open 'properties'. At that point itunes asks me if i want to import.
The drive is a Samsung SH-223L.
Autoplay is ON

Drivers/Hardware :: HDD Not Recognized In Startup - Only After Reset

Oct 6, 2015

I've recently upgraded to Windows 10 and I'm facing a problem: in the startup one of the HDD is not recognized.. I have to push the reset button and when Windows starts again then the HDD is recognized as normal and everyting goes OK.
But I'm getting tired of this routine.. everytime I need to use the computer I have to make the startup twice.
For more details.. I have Windows installed on a SSD HDD, then I have a SATA HDD and a third IDE HDD which is the one with the recognition problem.. I don't understand why the IDE HDD is not recognized in the first startup...

Drivers/Hardware :: USB3 Device Not Recognized

Sep 4, 2015

When I plug a USB3 flash drive into either USB3 port the message is Windows does not recognize it.
If I plug the same drive into another computer USB3 port everything is fine.
If I partially plug the drive in so that it only hits the USB2 contacts it works fine.
If I plug it into a USB2 port it works fine.
The drivers are installed. I uninstalled them and let it reinstall - same thing.

Drivers/Hardware :: CD / DVD Drive Not Recognized After Installation

Feb 10, 2016

The DVD drive worked fine prior to installing Win 10 - now the computer doesn't recognize it. Win 10 apparently thinks it is a removable drive. The CD-DVD drive is recognized in BIOS.
How do I diagnose the problem?

Drivers/Hardware :: DVD Drive Isn't Recognized After Upgrade?

Feb 1, 2016

My dvd player drive isn't listed and when you try and play a dvd the player spins but doesn't play anything since upgrading to windows 10. I have checked in device manager and it says device is working properly. I have also done the upgrade driver and it says I have the latest driver.

Intel

Drivers/Hardware :: USB Device Not Recognized - Malfunctioned

Aug 28, 2015

Just upgraded from Windows 7 to windows 10 --all working well except continually get message ' USB DEVICE NOT RECOGNIZED ,the last USB device you connected to this computer malfunctioned and windows does not recognize it 'I have gone into Device manager and see the yellow icon next to 'unknown usb device (device descriptor request failed ) I have tried deleting it, disabling it , updating the drivers and still get this stupid error message. Which USB caused the problem . No usb presently connected. I will not update other 2 computers to 10 if I cannot get this resolved. Was not a problem with Windows 7

Drivers :: Wireless Card Drops Out

Aug 11, 2015

Intel(r) Pro/wireless 3945abg Driver Windows 10

On installing Win !0 there was no wireless function, but win 10 initialised the card however when the laptop sleeps the card drops out and it has to be reset every time the card is Intel(R) Pro/Wireless 3945ABG. If the laptop is kept awake there is no problem

Drivers/Hardware :: Canon LBP6000 / 6018 Is Not Recognized

Intel Pro/wireless 3945abg Network Connection Driver Download Windows 10

Feb 23, 2016

When I plug in the cable for the Canon LBP6000/6018 printer in my new Lenovo 100 I get a message that it isn't recognized. I've used two different cables with the same result. My printer does not show up on the Devises screen. The printer worked perfectly on my old computer with Windows 7. I even converted my old computer to 10 and got the same error message, so the issue is with 10. How do I get my printer to work on 10? It's only a year old, so I won't replace it.

10.6.0.0_VT_126336.ZIP
3.6 MB
11,529
Networking
Windows Vista

3945abg Windows 10 Driver

Intel(R) PRO/WIRELESS 3945ABG/2200BG/2915ABG Drivers v 10.6.0.29 for Windows Vista
Supported OS:
Windows Vista* Business, 32-bit version, Windows Vista* Business, 64-bit version, Windows Vista* Enterprise, 32-bit version, Windows Vista* Enterprise, 64-bit version, Windows Vista* Home Basic, 32-bit version, Windows Vista* Home Basic, 64-bit version, Windows Vista* Home Premium, 32-bit version, Windows Vista* Home Premium, 64-bit version, Windows Vista* Starter, 32-bit version, Windows Vista* Ultimate, 32-bit version, Windows Vista* Ultimate, 64-bit version
Support for Microsoft Windows Vista:
1. An Inbox NDIS 6.0 driver is provided for the IntelĀ® PRO/Wireless 3945ABG, 2915ABG and 2200BG Network Connections.
2. IntelĀ® PROSet/Wireless Network Connection Software is not supported on Microsoft Windows Vista.
3. Only Intel wireless drivers are supported on the Microsoft Windows Vista operating system. Intel PROSet/Wireless Network Connection Software is not supported. Intel PROSet/Wireless will be replaced with Microsoft Windows Vista IHV service. Support for the Microsoft Windows Vista IHV service will be available in the upcoming software release from Intel in the second quarter of 2007.